Multiwall Polycarbonate Sheet
Multiwall/Twin wall Sheets
|
Compact Solid Sheets |
|
Embossed Sheets |
Corrugated Sheets |
|
Domes, Pyramid and Bubbles |
|
Multiwall
Polycarbonate Sheet is an impact resistant, energy-saving sheet. It's the
ideal roof glazing material for a wide range of application, such as conservatories,
greenhouses, shopping centers, industrial roof light and sports stadia.
Effective
thermal insulation
Multiwall Polycarbonate Sheet is available with two, three, four, five or six wall construction, giving various degrees of thermal insulation. K-values range from 3.5, for 6mm thin wall sheet, down to 1.5 for unique six wall Multiwall Polycarbonate Sheet .
High
impact strength
Multiwall Polycarbonate Sheet offers extremely high impact resistance,
minimizing the risk of breakage when subjected to falls of ice and snow
or dislodged roof tiles.
High
light transmission
Transparent grades of Multiwall Polycarbonate Sheets allow light transmission between 44% and 82% depending on thickness, Opal grades allow light transmission between 24% and 58%.
Resistance
to 'yellowing'
Multiwall Polycarbonate Sheet has a one sided surface coating which provides protection against the damaging effects of UV radiation in sunlight.
Safe
fire performance
Multiwall Polycarbonate Sheet is self extinguishing and difficult to ignite. As a typical example of fire test performance, 10mm twin wall Multiwall Polycarbonate Sheet is B 1 rated to DIN 4102, Part 1. Most grades are rated Class 1 according to British Standard BS 476 part 7.
Light
weight
Multiwall Polycarbonate Sheet is extremely light, with weights ranging from just 1300g/m2 for 6mm twin wall sheet, to 3500g/m 2 for 25 mm six wall sheet. This results in significant advantages in transportation, handling and installation - as well as allowing fewer structural supports.
 |
 |
 |
Versatility
Multiwall Polycarbonate Sheet is easy to cut, shape and install. It can be used flat, or cold formed into curved glazing bars.
Comprehensive
warranty
Multiwall Polycarbonate Sheet carries a ten year warranty against breakage. Excessive yellowing and loss of light transmission.
Installation
Multiwall Polycarbonate Sheet can be installed flat, or cold curved to a minimum radius of 175x the sheet thickness, It can be cut and drilled with conventional tools.
During installation, masking film should be peeled back approximately 50mm
to allow easy removal of film after profile has been fixed. Film should
be removed within 14 days of installation.**
Broad
product range
Six different sheet structures are available, in a wide range of sheet sizes, with standard lengths of 6000 and 7000mm, standard widths of 980, 1050, 1200, 1250, and 2100mm and with thicknesses ranging from 6mm to 25mm. Standard colors are Clear. Opal White and Solar Bronze.
Sheet
structures
 |
2 RS - Twin wall rectangular structure 3 TS - Triple wall tunnel structure 2 NS - Twin wall 'N' structure 4 RS - Four wall rectangular structure 5 RS - Five wall rectangular structure 6 RS - Six wall rectangular structure |
 |
Disclaimer:
we are not liable for the recommendations and technical details
given above as they change from time to time and depending on the
design and end requirement. The details are only to give you the guidelines
and you are requested to consult your architect / structural engineer
/ civil contractor before executing your jobs. |